Versions Compared

Old Version 2

changes.mady.by.user Jeff Stahlnecker

Saved on

compared with

New Version Current

changes.mady.by.user Sascha Rogall

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • 1. You got an inbound call on Port 1 from PSTN.
  • 2. You got a match in the berofix Dialplan and routed this call to the SIP Server.
  • 3. The SIP Server detect this call and route it back to the berofix card.
  • 4. The berofix gets a SIP-Reinvite and activate HW BRidging
  • 5. berofix routes the Call to the Fax on Port 2.


Bf bridging schema.pngImage Removed Image Added

 
schema 1:

After this HW Bridging is active. As you can see SIP-ReInvites are necessary to activate it, so please take care about this. The szenario to activate HW Bridging is always like described before. If you want to activate HW-Bridging between 2 LineInterfaces you have to set the master /slave Option on the WebGUI under the section Hardware. If one LineInterface is set to Master and the other one is slave HW Bridging will be activated between both modules. If both are set to master HW Bridging will be deactivated between the modules.

Note for Asterisk: When you use Asterisk and use "canreinvite=yes" you must not provide the "t" or "T" Options in app_dial. These prevent Asterisk to send re-Invites.