...

NOTE: The Fulltrace is the most helpful tool for beroNet to support you in analyzing a problematic situation.

Creating a Fulltrace

The Fulltrace can be started via the GUI under "Management->Fulltrace". Here you can choose which ISDN Ports should be traced, if the SIP Signalling and the SIP Audio should be traced. SIP Audio will consume a lot of memory, so it should be used only in very short time scales. A beroNet Gateway can only store about 2MB of trace data (per ISDN Port and SIP), after that it will stop tracing. Now the trace can be started via the "Start" button. Now the situation can be reproduced and after that the stop button should be pressed. Now you can download the Fulltrace via the "Download" Button.

Fulltrace Content

The Fulltrace default name is DebugFiles.tar.gz and consist of a gzipped tarball. The content of the Fulltrace consists of:

...