LTE Module Provider Selection

By default the module is configured to be in Automatic Mode regarding the LTE provider selection.

The module has two other modes: Manual and Manual/Automatic. The difference between the second of the two is, that if registration fails to the selected peer the module then switches to automatic mode after.

If you want to use a different provider than the automatically selected one, you have to scan for providers in the LTE section of the Hardware page. For this you have to click on the Scan Providers link:

After clicking this link, you have to wait around one minute. Then please update the page, and you should be presented with the scan result in form of a drop down list, if you have selected Manual or Manual/Automatic as the mode. You should only select a peer which is not listed as forbidden, otherwise registration might fail.

Select your peer and click Save on the bottom of the page.

This will currently generate a Red Activate. Click on the red activate and wait until the machine has rebooted.