The web interface of 3CX 20 is a bit different than older versions, but the configuration of a beroNet gateway with the IPBX is very similar.
Find out the IP of your Gateway
First things first: you need to find out the IP address of your gateway that you plugged to your LAN. To do so, run bfdetect. It enables you to find all beroNet devices on your network.
You can also use bfdetect to set a fixed IP address on your gateway (which is recommended).
Add a Gateway in 3CX
On the bottom part of the 3CX web interface is an Admin, click on "SIP Trunks".
Click on "+Add gateway"
The following window appears:
On this page, you can create the SIP connection between the 3CX and the gateway. A few important informations need to be entered:
- "Registrar/Server/Gateway Hostname or IP": You need to enter here the IP address of your beroNet Gateway
- Main Trunk Number needs to be assigned a value containing at least four digits
- "Authentification ID" is what we call "user" in the beroNet web interface
- "Authentification Password" is what we call "secret" in the beroNet web interface
Registering the beroNet gateway
On the beroNet gateway go to SIP→SIP and click the Add button. In the pop-up fill out the values 3cx provided for registering a SIP trunk, save and click activate.
