19.x Firmware
19.07 - 11.12.2019
- some GUI modifications (some pages are now organized in tabs, showing additional information)
- added GSM/LTE provider selection
- improved presentation of GSM/LTE status
- added validation as option to SIP peers without registration
- fixed issue when configuring
- fixed issue with 2FXO-1FXS module combination
- improved behaviour of the LEDs of the PSTN RJ45 ports
- fixed application of early_audio settings on SIP->FXO calls
- added option for permanent remote support
- fixed encoding REDIR_NR in ISDN NT-stack
- fixed short hangs triggered by non-responding DNS server
- default values changed: sip_from_display_setting=none (from display empty)
- default values changed: sip_ppi_user_setting=none (PPI header not added)
- default values changed: codecs=pcma (only pcma is now offered by default)
- default values changed: t38=0 (no t38 on PSTN/SIP calls)
- default values changed: s2s_t38_passthrough=0 (no t38 on SIP2SIP calls)
- default values changed: cd=1 (call deflect is enabled by defaull)
- default values changed: i2s_destination_numformat (default now: +(int)(nat)num, old default unknown: (num))
- default values changed: i2s_source_numformat (default now: +(int)(nat)num, old default unknown: (num))
- default values changed: TCP and UDP are by default activated now on each SIP stack
- NTP server pool.ntp.org configured by default
- no default ACL rules anymore, only access from local network is initially configured
- fixed bug losing the causes map on firmware update
- fixed bug re-registering SIP peers on DNS server timeout
- fixed bug on SIP->FXO calls, when FXO->SIP call was already active on analog port
- added support of ie_on_sip X-BF_FACILITY_MLPP header
- fixed generation of pcap traces when VLAN was activated
- fixed issues with PCM bridging
- SIP CLEARMODE calls automatically now offer UNRESTRICTED_DIGITAL as bearer capability on ISDN, and vice versa by default
- added clearmode_auto option, allowing to configure the CLEARMODE/UNRESTRICTED_DIGITAL bearer configuration
- fixed issue when re-invite SDP target url and gateway IP are identical
19.06 - 18.10.2019
- fixed problem of displaying T1E1 modules in the GUI
- fixed small memory leak
...