Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

21.x Firmware

...

Firmware 20.05.03 or newer needs to be installed, before installing the 21.01 02 Firmware

Reloading the browser cache can be required. Use CTRL+SHIFT+R or CTRL+F5 or SHIFT+F5 to reload it

...

  • fixed some memory leaks
  • fixed erroneous behaviour when call_forwarding_mode=Inviteadded recovery mode
  • fixed issue setting gsm_clir variable

  • fixed issue on firmware update via provisioning

  • fixed NetConf issue when DHCP mode

  • fixed registering issue on beroCloud settings in DHCP mode

  • fixed issues in SIP->SIP SRTP handling

  • fixed using correct tls listening port in contact string

  • fixed setting correct contact header on outgoing T.38 re-invite

  • fixed LTE signal strength display and values
  • fixed issues on Provisioning Page
  • added recovery mode
  • added fortified update and downgrade mechanism
  • added call statistics for SIP to SIP calls
  • added 1tr119 and sips_on_tls config option option

  • added multi actions to SIP peers page (set callgroups, sip stack, register)
  • added experimental option no_reason_header

  • added experimental option memory watchdog
  • quicker initialization of LTE modules, quicker GUI accessibililty during  LTE initialization
  • improved fulltrace behaviour (speed, single file download behaviour, analog port debug)
  • order of header fields for the from source auto value detection can be defined now
  • reworked SNMP GUI, added support for SNMP-traps

  • updated lighttpd version to 1.4.50
  • ACL rules support support DROP and ACCEPT rules
  • reworked the SIP stack configuratioin

  • allowing setting empty national code for SIP and ISDN


21.01 - 03.08.2021

IMPORTANT INFORMATION:

...

  • fixed issue with DTMF passthrough on SIP->SIP calls
  • fixed SDP handling issue, when there were multiple 180 RINGING messages with and without SDP

  • fixed some issues on firmware downgrade

  • fixed some issues on firmware upgrade

  • fixed issue on incoming LTE call, when one call is already connected

  • fixed error in API function TelephonyGetCdr and added new parameter download_old

  • fixed some issues in the Fulltrace
  • fixed handling of TON in Calldeflect/Rerouting facility for generating 302 redirect

  • fixed rejecting calldeflect/rerouting with returnError Facility when calldeflect is disabled

  • fixed LTE state table and added more information about technology
  • added GUI support for TLS 1.2

  • added SIP support for TLS 1.0, TLS 1.1 TLS 1.2, removed support for SSLv3

  • added TLS certificate verification now enabled by default (if there is a problem registering to your TLS SIP server, upload the correct certificate or disable verification)

  • added new licensing mechanism for SIP-SIP calls (transcoding and transparent channels)

  • added made RTP handling selectable (transparent vs transcoding calls)

  • added more performant handling of transparent SIP->SIP RTP streams

  • added access to isgw telnet konsole in the GUI

  • added custom tones to be configurable in the GUI for FXO

  • added wait4idle timeout configurable on FXO to handle incoming ringing

  • added verify_ringing option to FXO port group

  • added FXS ring oscillator intervals to be configurable

  • added experimental option ltedtmf, to handle non inband DTMF indications on LTE calls

  • added config option anonymous_from_user_on_privacy

  • added activationDiversionQ numbers are now available as dialplan variable

  • added showing the network link status in GUI

  • added interface can now be given for ACL rules

  • added reworked DoS protection settings, can now be configured for different packet types and interfaces

  • added more information to call statistic (formerly port statistic)
  • reworked the Network Settings page

  • improved debugging of PSTN ports in fulltrace

  • performance improvements in GUI

  • reduced memory consumption of isgw

  • using ephemeral portrange 50000-60000 for outgoing UDP requests

  • after a hardware factory reset via jumper, the SSH, HTTP and HTTPS Ports will be opened

...