21.x Firmware
IMPORTANT INFORMATION:
Firmware 20.05.03 04 or newer needs to be installed, before installing the 21.02 or later Firmware
...
- fixed NTP issue when DNS was not configured
- fixed memory leak occurring on outgoing SIP INVITEs
- added experimental_option gsm_pdu_mode
- fixed some problems on LTE port initialization
- fixed issue uploading a certificate
- fixed behaviour when using an individual ISDN port as FromID in dialplan instead of the port group
- fixed graceful-activate / reboot behavior
- removed requirement to set national code in ISDN group (denmark, luxembourg)
- displaying client certificate in the GUI
- improved update-installation process
- added experimental_option gsm_pdu_mode
21.02 - 11.03.2022
- fixed some memory leaks
- fixed erroneous behaviour when call_forwarding_mode=Invite
fixed issue setting gsm_clir variable
fixed issue on firmware update via provisioning
fixed NetConf issue when DHCP mode
fixed registering issue on beroCloud settings in DHCP mode
fixed issues in SIP->SIP SRTP handling
fixed using incorrect TLS listening port in contact string
fixed setting incorrect contact header on outgoing T.38 re-invite
- fixed LTE signal strength display and values
- fixed issues on Provisioning Page
- fixed API Calls (NetworkSetConfiguration, FirmwareUpdate, ProvisioningTriggerConfig)
- added recovery mode
- added fortified update and downgrade mechanism
- added call statistics for SIP to SIP calls
added 1tr119 and sips_on_tls config option option
- added multi actions to SIP peers page (set callgroups, sip stack, register)
added experimental option no_reason_header
- added experimental option memory watchdog
- added Provisioning over TLS and the corresponding 'Redirect Task' on beroCloud
- quicker initialization of LTE modules, quicker GUI accessibililty during LTE initialization
- improved fulltrace behaviour (speed, single file download behaviour, analog port debug)
- order of header fields for the from source auto value detection can be defined now
reworked SNMP GUI, added support for SNMP-traps
- updated lighttpd version to 1.4.50
- ACL rules support support DROP and ACCEPT rules
reworked the SIP stack configuratioin
allowing setting empty national code for SIP and ISDN
- enhanced the Info Page (SIP License and Storage information displayed)
...
- fixed issue with DTMF passthrough on SIP->SIP calls
fixed SDP handling issue, when there were multiple 180 RINGING messages with and without SDP
fixed some issues on firmware downgrade
fixed some issues on firmware upgrade
fixed issue on incoming LTE call, when one call is already connected
fixed error in API function TelephonyGetCdr and added new parameter download_old
- fixed some issues in the Fulltrace
fixed handling of TON in Calldeflect/Rerouting facility for generating 302 redirect
fixed rejecting calldeflect/rerouting with returnError Facility when calldeflect is disabled
- fixed LTE state table and added more information about technology
added GUI support for TLS 1.2
added SIP support for TLS 1.0, TLS 1.1 TLS 1.2, removed support for SSLv3
added TLS certificate verification now enabled by default (if there is a problem registering to your TLS SIP server, upload the correct certificate or disable verification)
added new licensing mechanism for SIP-SIP calls (transcoding and transparent channels)
added made RTP handling selectable (transparent vs transcoding calls)
added more performant handling of transparent SIP->SIP RTP streams
added access to isgw telnet konsole in the GUI
added custom tones to be configurable in the GUI for FXO
added wait4idle timeout configurable on FXO to handle incoming ringing
added verify_ringing option to FXO port group
added FXS ring oscillator intervals to be configurable
added experimental option ltedtmf, to handle non inband DTMF indications on LTE calls
added config option anonymous_from_user_on_privacy
added activationDiversionQ numbers are now available as dialplan variable
added showing the network link status in GUI
added interface can now be given for ACL rules
added reworked DoS protection settings, can now be configured for different packet types and interfaces
- added more information to call statistic (formerly port statistic)
reworked the Network Settings page
improved debugging of PSTN ports in fulltrace
performance improvements in GUI
reduced memory consumption of isgw
using ephemeral portrange 50000-60000 for outgoing UDP requests
after a hardware factory reset via jumper, the SSH, HTTP and HTTPS Ports will be opened
...