16.x Firmware
16.10 - 05.07.2018
- fixed setting correct cause from causes.map in ISDN DISCONNECT and RELEASE_COMPLETE, if no dialplan entry was found
- fixed wrong setting of contact string, when externip/stun was not used
- fixed a memory leak when using DNS SRV
- fixed error when registering to the cloud
- fixed password problem between Zeroconf and PBX Wizard
- fixed error in SIP→SIP dialplan entry when using dialplan variables
- fixed bug with timeshift of timezone with half hours
- contact header SIP URL port will always be formatted including port, even if it is 5060
- fulltrace starting now rotates the logfiles
- added config option s2s_t38_passthrough
16.09 - 23.04.2018
- changed maximum SIP registration refresh value from 2000 to 3600
- fixed error configuring PCM slave mode
- fixed behaviour when T.38 reinvite was rejected and a G711 re-invite was received
- fixed setting correct port when sip domain is used
- using uppercase for codecs in SDP now
- isdn2sip_destination_numformat now used for fxs call as well
- added config option sip_info_on_facility
- added config option s2s_nat_opener
- handling 302 correctly on SIP→SIP calls
- waiting longer time to go into idle state on FXO calls
- added experimental_option emergency_numbers
- fixed stability issues
- experimental option no100fix can be now 0, 1 or 2
- now sending 302 transfer in SIP direction if calldeflect is received on ISDN side and cd=1
- fixed no audio problem when SDP was contained in 182 message
- refreshing registrations when DNS query result has changed
...