Changelog - beroNet OS (Gateways)

21.x Firmware

21.01 - 03.08.2021

IMPORTANT INFORMATION:

Firmware 20.05.03 needs to be installed, before installing the 21.01 Firmware

fixed issue with DTMF passthrough on SIP->SIP calls
fixed SDP handling issue, when there were multiple 180 RINGING messages with and without SDP
fixed some issues on firmware downgrade
fixed some issues on firmware upgrade
fixed issue on incoming LTE call, when one call is already connected
fixed error in API function TelephonyGetCdr and added new parameter download_old
fixed some issues in the Fulltrace
fixed handling of TON in Calldeflect/Rerouting facility for generating 302 redirect
fixed rejecting calldeflect/rerouting with returnError Facility when calldeflect is disabled
fixed LTE state table and added more information about technology
added GUI support for TLS 1.2
added SIP support for TLS 1.0, TLS 1.1 TLS 1.2, removed support for SSLv3
added TLS certificate verification now enabled by default (if there is a problem registering to your TLS SIP server, upload the correct certificate or disable verification)
added new licensing mechanism for SIP-SIP calls (transcoding and transparent channels)
added made RTP handling selectable (transparent vs transcoding calls)
added more performant handling of transparent SIP->SIP RTP streams
added access to isgw telnet konsole in the GUI
added custom tones to be configurable in the GUI for FXO
added wait4idle timeout configurable on FXO to handle incoming ringing
added verify_ringing option to FXO port group
added FXS ring oscillator intervals to be configurable
added experimental option ltedtmf, to handle non inband DTMF indications on LTE calls
added config option anonymous_from_user_on_privacy
added activationDiversionQ numbers are now available as dialplan variable
added showing the network link status in GUI
added interface can now be given for ACL rules
added reworked DoS protection settings, can now be configured for different packet types and interfaces
added more information to call statistic (formerly port statistic)
reworked the Network Settings page
improved debugging of PSTN ports in fulltrace
performance improvements in GUI
reduced memory consumption of isgw
using ephemeral portrange 50000-60000 for outgoing UDP requests
after a hardware factory reset via jumper, the SSH, HTTP and HTTPS Ports will be opened

20.x Firmware

20.05.03 - 17.05.2021

bearer capability will now be passed through transparently on ISDN->ISDN calls
added config option bearer
fixed problem on ISDN->ISDN calls when CLEARMODE codec was used
fixed control of LED lights on 24 FXS gateway
changed format of analog port voltage logging
fixed problem sending Invites to different proxy after registrar failure
fixed XSS issue

20.05.02 - 09.04.2021

fix for sdpless re-invite
fix for incoming sdpless invite
fix for authenticating incoming bye message
fixed passing through SIP INFO for SIP-ISDN
fixed Language issue on State page
fix for audio problems for new LTE module
fixed sending syslog messages after restart
fixed generating some config files after hardware factory reset
fixed problem with DNS SRV when DNS server was not available on startup
added using SRV alternative peers, when register attempt fails
reordered items on GUI logging page
fixed sporadically ocurring problem with PSTN database setup after a factory reset
added ACL rule to allow access from bfdetect tool

20.05.01 - 17.12.2020

fixed typo in german translation, rendering the GUI inaccessible

20.05 - 16.12.2020

IMPORTANT INFO: Switching to german language renders the GUI inaccessible

In this case, install the 20.05.01 Firmware by rebooting into update mode by calling:

http://GATEWAYIP/app/api/api.php?apiCommand=FirmwareUpdateReboot

replace the string GATEWAYIP with the IP of your gateway

changed if ISDN port is blocked, calls are rejected with cause 44 now
added allowing schedule of graceful activate/reboot when no calls are affected
added support for callgroups
added option max_simultaneous call for SIP groups
added improved network troubleshooting
added support for SNMPv3 UDP/TLS
added config option t38_ignore_offer
added contact_all_setting allowing to modify registration contact header
added monitored_sip_peer option to allow shutting down ISDN ports when SIP peer goes down
added improved time settings configuration, Summer/Wintertime change now configurable
fixed issues in time settings management
fixed issues during factory reset
fixed showing used ISDN channel in CDR when call was rejected directly after SETUP
fixed backup/restore of hostname
fixed not accepting bye from caller in early dialog on SIP to SIP calls
fixed issues with GSM table not loading
fixed not setting contact in validating OPTIONS packets, when validating without registration
fixed dnssrv request for peers configured with TLS
fixed GSM/LTE unicode converter
fixed restoring NTP host from backup
fixed not using configured dtmflen value, when rfc2833_passthrough=0
fixed memory leak when using validate without registration
fixed handling of an re-invite not containing SDP
fixed sending out rfc2833 events when dtmfmode=inband was used
fixed not refreshing DHCP anymore when request failed
fixed problem adding some network routes
fixed issue correctly deleting and deregistering cloud settings on factory reset
fixed number prefixing when failover_account is used, using settings from failover account
fixed crash when restarting ISDN port that was not configured
several GUI fixes and improvements
GUI allowing multiple selection and deletion of SIP groups
GUI fixed dialplan javascript delete issue
GUI added from_display and other variables to list of selectable SIP settings
GUI added cancel button to Full-Trace
GUI added additional options for managing Full-Trace
GUI added ajax refresh for active calls
disabled PRACK support by default, if not explicitly enabled via experimental option enable_prack
disabled support for SNMP traps

20.04.01 - 13.08.2020

fixed problem resetting the GUI password

20.04 - 07.08.2020

fixed unnecessary restarting of voice channel on SIP->SIP calls in case of reinvite
fixed memory leaks occuring on gateways with T1E1 modules
fixed offering wrong RTP port, when dialplan was searched multiple times on analog overlap dialing calls
fixed addressing deprecated/wrong target IP on outgoing INVITEs when DNS SRV was used and DNS address changed occurred
fixed SMS not being able to contain € sign
added SMS Webhook, allowing URL to be contacted on SMS reception
added Network troubleshooting features to GUI
added config option header_passthrough_filter to be used together with config option header_passthrough
added GUI option to disable the cloud redirect function
added informative message about cloud status
restart_after_linkloss sends additional restart message on channel 0
closing dialplan_debug window on session timeout
different loglevel settings are now individually configurable in the GUI
supporting now new beroNet LTE module
cloud monitoring and status will be enabled when registering to the cloud
optimized Yellow Activate (ACL rules restarted only after have been updated)
homogenized physical and GUI LEDs for LTE module
fixed issue updating DNS Server
fixed GUI issues (Call-Progress Table, Wizard, Market)
fixed 3CX Wizard redirect issue
on GSM and LTE cards SMS stored on the SIM will be deleted during initialization (please backup any important messages)

20.03 - 05.06.2020

fixed some stability issues
fixed some memory leaks
fixed some hang issuesimproved GUI performance
fixed GUI bug saving SIP peer secret
reworked DNS system, using internal DNS cache for better performance
fixed some display problems during dialplan debug
added support for "Technische Richtlinien Notruf" of the Telekom
fixed problem with ISDN calldeflect when using very long numbers
fixed some Labelling errors in the GUI
added new Wizard for 3cx and other VoiP PBX
added Api Functions CFActivate and CFDeactivate
added support for LE910C1 LTE
beroCloud Configuration now has own menu entry
showing beroCloud registration status on demand
added support for SMS delivery reports, added Api function SmsGetSendReport
incoming SMS only deleted automatically if there are more than 1000 unfetched
added experimental option telnet_max_connections, default value is 4
increased allowed syslog port range
fixed issue with SDP-less re-invite in connected SIP->SIP call
fixed wrongfully setting SDP on SIP->SIP call in some situations
fixed losing part of SIP configuration when Factory Reset is done and 'keep SIP settings' is selected
added preparations for beroCloud redirection service

20.02 - 19.02.2020

GUI-Mode: Reloading the browser cache can be required. Use CRTL+SHIFT+R or CTRL+F5 or SHIFT+F5 to reload it

fixed problem on SIP→ISDN BRI/NT calls not going to next free port if all channels are occupied
added keeping 'ACL settings' during Wizard Configuration
added a PHP validator during a GET or a POST request
improved the Javascript validator
improved the security against XSS and SQL injection vulnerabilities
fixed problem restarting LTE port on State page
fixed problem saving 'Remote Management' Settings in German-Mode
fixed some Javascript errors or not expected behavior
fixed GUI-error with 'Dialtone passthrough' settings from FXO module
fixed GUI-bug from Dialplan popup settings (Easy and Advanced Mode)

20.01 - 06.02.2020

fixed prepending of VAZ (prefixes) when no national/international prefixes have been set
fixed updating and reload problems of causes map
fixed erroneous reregister request to the berocloud, after deregistering, improved GUI presentation
fixed missing values in SIP settings dropdowns (e.g. in From user/Pai User ...)
fixed displaying incorrect value in the GUI for Destination/Source Number format
fixed not capturing localhost SIP message during fulltrace
fixed early audio on PSTN->PSTN calls
fixed instability when SIP INFO package without payload was received
fixed problem with downgrade from 19.xx to 16.xx not starting, occurring on very old gateways
fixed losing of transport settings for the SIP stack when upgrading from 16.xx to 20.xx
fixed showing of SMS Tab in the GUI for LTE modules
fixed problem on LAN/WAN using same MAC addresses, using different MACs now
some minor GUI layout improvements
added new value auto for SIP dialplan source and dialplan destination and made it default
added new config option sdp_codec_selection, passing through the offered codecs
using second DNS server if the first on fails
GUI session timer is refreshed on click activity
on BRI rejecting now SETUP, when two calls are already
improved Dialplan Debugging

19.x Firmware

19.07 - 11.12.2019

some GUI modifications (some pages are now organized in tabs, showing additional information)
added GSM/LTE provider selection
improved presentation of GSM/LTE status
added validation as option to SIP peers without registration
fixed issue when configuring
fixed issue with 2FXO-1FXS module combination
improved behaviour of the LEDs of the PSTN RJ45 ports
fixed application of early_audio settings on SIP->FXO calls
added option for permanent remote support
fixed encoding REDIR_NR in ISDN NT-stack
fixed short hangs triggered by non-responding DNS server
default values changed: sip_from_display_setting=none (from display empty)
default values changed: sip_ppi_user_setting=none (PPI header not added)
default values changed: codecs=pcma (only pcma is now offered by default)
default values changed: t38=0 (no t38 on PSTN/SIP calls)
default values changed: s2s_t38_passthrough=0 (no t38 on SIP2SIP calls)
default values changed: cd=1 (call deflect is enabled by defaull)
default values changed: i2s_destination_numformat (default now: +(int)(nat)num, old default unknown: (num))
default values changed: i2s_source_numformat (default now: +(int)(nat)num, old default unknown: (num))
default values changed: TCP and UDP are by default activated now on each SIP stack
NTP server pool.ntp.org configured by default
no default ACL rules anymore, only access from local network is initially configured
fixed bug losing the causes map on firmware update
fixed bug re-registering SIP peers on DNS server timeout
fixed bug on SIP->FXO calls, when FXO->SIP call was already active on analog port
added support of ie_on_sip X-BF_FACILITY_MLPP header
fixed generation of pcap traces when VLAN was activated
fixed issues with PCM bridging
SIP CLEARMODE calls automatically now offer UNRESTRICTED_DIGITAL as bearer capability on ISDN, and vice versa by default
added clearmode_auto option, allowing to configure the CLEARMODE/UNRESTRICTED_DIGITAL bearer configuration
fixed issue when re-invite SDP target url and gateway IP are identical

19.06 - 18.10.2019

fixed problem of displaying T1E1 modules in the GUI
fixed small memory leak

19.05 - 02.10.2019

fixed issue using wrong cidlen and crlen on PRI

19.04 - 30.09.2019

added codec selection for LTE
added config option gsm_clir to configure
added configurability of ISDN cidlen and crlen for BRI
fixed issue uploading/deleting SIP TLS certificates
fixed incorrect prepending of country and city code
fixed collecting of debug data during full-trace
fixed slow down of the GUI while checking for firmware
cloud based remote session can be now ended via the GUI
better handling of privacy header in auto mode on SIP->SIP calls (outgoing leg uses values of first leg)

19.03 - 28.08.2019

fixed issue with incomplete configuration after update from 16.xx firmware
fixed log rotating pcap files during full trace
fixed problem of setting nameserver when DHCP is on
fixed issue on SIP->ISDN calls when externip of stun server was used
fixed netconfigserver reported ip when bonding mode is selected
added configurability of NTP server when DHCP is activated, explicitly given NTP server has preference

19.02 - 06.08.2019

fixed missing files in Full Trace (gsm debug.log on LTE, LAN pcap in bonding mode)
added missing Termination Causes to CDR
Reworked and improved the different Gateway Wizards
fixed erroneous prepending of configured prefix to automatic number format
added GUI field for configuring SIP contact header
fixed problem with FXS not working
fixed file descriptor leaks
removed s2s_302_passthrough
added call_forwarding_mode instead, allowing to either send a 302 or a reinvite (with optional diversion header)
config values from_sip_dest_setting (dialplan destination) and from_sip_src_setting (dialplan source) can be now defined with a regular expression
added config values sip_priv*, to add custom headers to an outgoing Invite

19.01 - 27.06.2019

Most notable changes in comparison to current 16.15 firmware:

Support for beroNet 3LI gateways with two ethernet ports
Separate SIP stacks can be configured for each network interface
Sip peers can be individually configured to use their own bind port
Facilities for DoS Protection

16.x Firmware

16.17 - 19.11.2019

fixed slowness issue in GUI
fixed initialization issue with FXO and FXS after hardware factory reset was done

16.16 - 24.09.2019

better handling of privacy header in auto mode on SIP->SIP calls (outgoing leg uses values of first leg)
added config option isdn_no_sending_complete
fixed incorrect prepending of country and city code
fixed sending two SETUPs on SIP->ISDN calls, when stun or externip was enabled
fixed problem with setting iptables rules for SIP peers with long group name
fixed printing of configuration settings

16.15 - 19.06.2019

fixed error in SDP when rejecting T.38, if multiple media sections were offered
fixed problem on SIP->FXO calls accidentally terminating FXO->SIP call on used port
fixed potential resource leak of RTP ports on SIP->SIP calls
for SIP->SIP calls, dtmfmode can be configured for both SIP legs individually
new options for s2s_nat_opener
better handling of potentially broken https certificates

16.13 - 29.03.2019

fixed error when restoring isgw.causes
fixed XSS vulnerability
fixed prefixing dad with ton prefix
fixed problem with no audio on SIP->SIP calls when send_only was offered in SDP
fixed problem for with SDP offers offering codecs with higher sampling rate
fixed offering of tracing ISDN ports in fulltrace only when no ISDN ports are available
fixed issue with analog port configuration during firmware update
added config option config option isdn2sip_source_numformat
added support for FXO adminstrative offhook mode
added new parameters to use_privacy_header config option, options are now auto, off, none and id
added config option sip_302_contact_user
added config option sip_302_contact_url
removed config_option s2i_transfer_url_cd
removed config option d2s_oad_prefix_setting
removed SIP profile management from GUI
config option disable_prack now used for inbound sip calls too
on T1/E1 modules E1-HDLC is used as default, for reconfiguring to CAS/T1 update the hardware configuration during a factory reset now
now displaying hardware configuration table when the module has been be just plugged
now display pipe installation-progress when a new tab is opened
improved collecting of debug data during full-trace
improved handling of FSK caller-id detection on FXO ports
a couple of cosmetic improvements in the GUI

16.12 - 11.01.2019

fixed disabling of echo canceller
fixed VAZ prepending in case of usage of failover proxy
fixed VAZ prepending in GSM and FXS calls
fixed timeslot allocation for T1E1 module
fixed problem with s2s licence reading for new cards starting with serial number 30
added config option ec_sparse_params
added config option s2s_rtp_passthrough
added config option r2config for setting MFCR2 parameters
added codes for rejecting RTP or T.38, status code can be configured now in the causes map
changed default reject status code from 415 to 488 for T.38
changed default for sip_info_on_facility to 0

16.11 - 16.08.2018

fixed bug affecting incoming invites unintentionally being rejected sometimes
fixed rtp_packet_size config option for SIP→SIP calls
fixed SIP→SIP license parsing on new 3-line-interface gateway

16.10 - 05.07.2018

fixed setting correct cause from causes.map in ISDN DISCONNECT and RELEASE_COMPLETE, if no dialplan entry was found
fixed wrong setting of contact string, when externip/stun was not used
fixed a memory leak when using DNS SRV
fixed error when registering to the cloud
fixed password problem between Zeroconf and PBX Wizard
fixed error in SIP→SIP dialplan entry when using dialplan variables
fixed bug with timeshift of timezone with half hours
contact header SIP URL port will always be formatted including port, even if it is 5060
fulltrace starting now rotates the logfiles
added config option s2s_t38_passthrough

16.09 - 23.04.2018

changed maximum SIP registration refresh value from 2000 to 3600
fixed error configuring PCM slave mode
fixed behaviour when T.38 reinvite was rejected and a G711 re-invite was received
fixed setting correct port when sip domain is used
using uppercase for codecs in SDP now
isdn2sip_destination_numformat now used for fxs call as well
added config option sip_info_on_facility
added config option s2s_nat_opener
handling 302 correctly on SIP→SIP calls
waiting longer time to go into idle state on FXO calls
added experimental_option emergency_numbers
fixed stability issues
experimental option no100fix can be now 0, 1 or 2
now sending 302 transfer in SIP direction if calldeflect is received on ISDN side and cd=1
fixed no audio problem when SDP was contained in 182 message
refreshing registrations when DNS query result has changed

16.08 - 07.11.2017

added toneset for Ireland
fixed hostname setting
fixed userapp-version issue
fixed not printing first line in dialplan debug
fixed call progress table backup&restore bug
changed default setting of ppi/rpi/xheaders, they are now disabled by default, sip_pai_user=${new_source} now
hostname/gateway not displayed in dhcp mode
ntpserver setting overrides DHCP provided ntp server if set

16.07 - 25.07.2017

fix for parsing sip ppi header
added option no100fix, fixing problem when no 100 trying is received
fixed sip failover behaviour on gsm
fixed memory leak when using stun
fixed problem encoding ISDN connected party number

16.06 - 28.06.2017

fixed security issues with telnet access to card
fixed SIP problems with peers not listening on standard SIP port
fixed GUI error message after language switch
fixed GUI error saving FXS Clip
fixed problem with dialplan restore
debug files get tagged with their md5sum now
improved DNS SRV handling
improved SMS handling

16.05 - 27.01.2017

fixed GUI error setting t38 in dialplan
fixed GUI error saving GSM extension
fixed GUI error setting call progress table
fixed GUI Dialplan-Debug behaviour
fixed one way audio problem on SIP→SIP calls
fixed reinvite handling on SIP→SIP calls

16.04 - 22.12.2016

fixed error storing "more settings" in dialplan
fixed limitation on density of inbound SIP calls

16.03 - 29.11.2016

new responsive GUI
new logging facilities
new config option skip_setup_ack
new config option resync_on_notify
new config option isdn_dad_setting
new config option dialtone_digits
added dialplan variable new_destination_auto
fixed VLAN issues
fixed problem with dialplan copy and multiple delete
fixed SMS problems
fixed problem with SIP info messaged on FXS calls
try option 67 on DHCP if option 66 is missing
display name in register requests now in quotes
in-call ISDN Information messages will now converted to DTMF
fixed some minor issues in the GUI
fixed problem with provisioning polling
fixed config option outgoing_bchannels
new REST-API functions
netconfigserver is now configurable
improved qsig name handling
support for DNS SRV
minimum accepted session expires now configurable
Major security fixes, more info here

Known Issues:

T38 disable doesn't save in the Dialplan - as workaround you can configure "t38=0" in the text-area under the "more" tab.

3.0 STABLE - Firmware

3.0.19 - 25.07.2017

added option no100fix, fixing problem when no 100 trying is received
fixed sip failover behaviour on gsm
fixed memory leak when using stun
fixed problem encoding ISDN connected party number

3.0.18 - 24.05.2017

Security fix, telnet interface not more accessible from LAN by default
fixed instablity problems in SIP stack occurring when a large time change shift happens

3.0.17 - 03.02.2017

fixed problem in dialplan debug
fixed problem with incoming 181 and 182 provisional responses
fixed bug in Factory Reset

3.0.16 - 18.01.2017

fixed return code for provisioning

3.0.15 - 12.01.2017

reworked session handling for dialplan debug for more security

3.0.14 - 10.01.2017

reworked GUI session handling. GUI is now more secure as its files can only be accessed via the GUI
new_source_auto will now use TON_SUBSCRIBER as default

3.0.13 - 29.11.2016

new config option skip_setup_ack
new config option dialtone_digits for FXS inbound cals
new config option emergency
display name in register requests now in quotes
in-call ISDN Information messages will now converted to DTMF
fixed config option outgoing_bchannels
bugfix gsm provisioning
fixed problem with SIP info messaged on FXS calls
fixed problem with SDP offers containing 16000Hz Codecs