...
automatically connect the beroNet device to a specific beroCloud account
Set a provisioning URL with a config that will be restored on start-up
Set a provisioning URL over to connect via TLS with a config that will be restored on start-up
...
The beroNet Gateway must have at least Firmware Version 20.03 installed. (rc-21-02rc123 for Provisioning over TLS)
The beroNet Gateway must have an Internet connection and must have a proper name-server configuration.
You can find the beroNet Cloud under http://berocloud.beronet.com
In your cloud account you must have at least one location to register
This feature requires a beroCloud Professional account in order to use the Redirect Service.
...
How it Works
When the beroNet SBC or Gateway boots up, it automatically sends an encrypted request to the beroCloud through a secure tunnel and checks if a task to execute has been issued. It checks the type of the task and will execute the task with the given parameters.
For security reasons you will need the complete serial number and the MAC-address of the device in order to create a device redirect task. You can find it on the sticker on the box or on the device itself or in the GUI → Management → Info.
Serial number example: 30-16-0000012345
MAC address example: d1 d1:df:2d:34:56:c1
Create a Device Redirect
Visit https://berocloud.beronet.com/ and go to Devices → Devices Redirect.
...
Provisioning over TLS
The Provisioning over -TLS resumes combines the two Services services described previously: CloudConnect and Provisioning. Besides it will
The device will be connected to beroCloud and a provisioning-URL will be set
beroCloud will generate a certificate for the beroNet Gateway to connect to the provided provisioning server over TLS using its own -URL via TLS and is therefore encrypted and authenticated. (This is useful if the provisioning server is outside of your Local Area Network)
The certificate will be signed by our own beroCloud Certificate Authority (CA), which makes authentification of the device possible.
...
Please note
Configuring the provisioning server in a way to only allow TLS connections with beroCloud signed certificates is recommended!
...
| Info |
|---|
Please Note: the beroNet Gateway requires a Firmware Version 21.02-rc123 or higher |
| Info |
|---|
Please |
...
Note: the provisioning server key must be signed by beroCloud and requires |
...
TLS 1.2 |
...
Disable Device Redirect Service
...