Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 41 Next »

19.x Firmware

19.06 - 18.10.2019

  • fixed problem of displaying T1E1 modules in the GUI
  • fixed small memory leak

19.05 - 02.10.2019

  • fixed issue using wrong cidlen and crlen on PRI

19.04 - 30.09.2019

  • added codec selection for LTE
  • added config option gsm_clir to configure
  • added configurability of ISDN cidlen and crlen for BRI
  • fixed issue uploading/deleting SIP TLS certificates
  • fixed incorrect prepending of country and city code
  • fixed collecting of debug data during full-trace
  • fixed slow down of the GUI while checking for firmware
  • cloud based remote session can be now ended via the GUI
  • better handling of privacy header in auto mode on SIP->SIP calls (outgoing leg uses values of first leg)

19.03 - 28.08.2019

  • fixed issue with incomplete configuration after update from 16.xx firmware
  • fixed log rotating pcap files during full trace
  • fixed problem of setting nameserver when DHCP is on
  • fixed issue on SIP->ISDN calls when externip of stun server was used
  • fixed netconfigserver reported ip when bonding mode is selected
  • added configurability of NTP server when DHCP is activated, explicitly given NTP server has preference

19.02 - 06.08.2019

  • fixed missing files in Full Trace (gsm debug.log on LTE, LAN pcap in bonding mode)
  • added missing Termination Causes to CDR
  • Reworked and improved the different Gateway Wizards
  • fixed erroneous prepending of configured prefix to automatic number format
  • added GUI field for configuring SIP contact header
  • fixed problem with FXS not working
  • fixed file descriptor leaks
  • removed s2s_302_passthrough
  • added call_forwarding_mode instead, allowing to either send a 302 or a reinvite (with optional diversion header)
  • config values from_sip_dest_setting (dialplan destination) and from_sip_src_setting (dialplan source) can be now defined with a regular expression
  • added config values sip_priv*, to add custom headers to an outgoing Invite


19.01 - 27.06.2019

Most notable changes in comparison to current 16.15 firmware:

  • Support for beroNet 3LI gateways with two ethernet ports
  • Separate SIP stacks can be configured for each network interface
  • Sip peers can be individually configured to use their own bind port
  • Facilities for DoS Protection

16.x Firmware

16.17 - 19.11.2019

  • fixed slowness issue in GUI

  • fixed initialization issue with FXO and FXS after hardware factory reset was done

16.16 - 24.09.2019

  • better handling of privacy header in auto mode on SIP->SIP calls (outgoing leg uses values of first leg)

  • added config option isdn_no_sending_complete
  • fixed incorrect prepending of country and city code
  • fixed sending two SETUPs on SIP->ISDN calls, when stun or externip was enabled
  • fixed problem with setting iptables rules for SIP peers with long group name
  • fixed printing of configuration settings

16.15 - 19.06.2019

  • fixed error in SDP when rejecting T.38, if multiple media sections were offered

  • fixed problem on SIP->FXO calls accidentally terminating FXO->SIP call on used port
  • fixed potential resource leak of RTP ports on SIP->SIP calls
  • for SIP->SIP calls, dtmfmode can be configured for both SIP legs individually
  • new options for s2s_nat_opener
  • better handling of potentially broken https certificates

16.13 - 29.03.2019

  • fixed error when restoring isgw.causes

  • fixed XSS vulnerability

  • fixed prefixing dad with ton prefix

  • fixed problem with no audio on SIP->SIP calls when send_only was offered in SDP

  • fixed problem for with SDP offers offering codecs with higher sampling rate

  • fixed offering of tracing ISDN ports in fulltrace only when no ISDN ports are available

  • fixed issue with analog port configuration during firmware update

  • added config option config option isdn2sip_source_numformat

  • added support for FXO adminstrative offhook mode

  • added new parameters to use_privacy_header config option, options are now auto, off, none and id

  • added config option sip_302_contact_user
  • added config option sip_302_contact_url
  • removed config_option s2i_transfer_url_cd

  • removed config option d2s_oad_prefix_setting

  • removed SIP profile management from GUI

  • config option disable_prack now used for inbound sip calls too

  • on T1/E1 modules E1-HDLC is used as default, for reconfiguring to CAS/T1 update the hardware configuration during a factory reset now

  • now displaying hardware configuration table when the module has been be just plugged

  • now display pipe installation-progress when a new tab is opened

  • improved collecting of debug data during full-trace

  • improved handling of FSK caller-id detection on FXO ports

  • a couple of cosmetic improvements in the GUI

16.12 - 11.01.2019

  • fixed disabling of echo canceller

  • fixed VAZ prepending in case of usage of failover proxy

  • fixed VAZ prepending in GSM and FXS calls

  • fixed timeslot allocation for T1E1 module

  • fixed problem with s2s licence reading for new cards starting with serial number 30

  • added config option ec_sparse_params

  • added config option s2s_rtp_passthrough

  • added config option r2config for setting MFCR2 parameters

  • added codes for rejecting RTP or T.38, status code can be configured now in the causes map

  • changed default reject status code from 415 to 488 for T.38

  • changed default for sip_info_on_facility to 0


16.11 - 16.08.2018

  • fixed bug affecting incoming invites unintentionally being rejected sometimes
  • fixed rtp_packet_size config option for SIP→SIP calls
  • fixed SIP→SIP license parsing on new 3-line-interface gateway

16.10 - 05.07.2018

  • fixed setting correct cause from causes.map in ISDN DISCONNECT and RELEASE_COMPLETE, if no dialplan entry was found
  • fixed wrong setting of contact string, when externip/stun  was not used
  • fixed a memory leak when using DNS SRV
  • fixed error when registering to the cloud
  • fixed password problem between Zeroconf and PBX Wizard
  • fixed error in SIP→SIP dialplan entry when using dialplan variables
  • fixed bug with timeshift of timezone with half hours
  • contact header SIP URL port will always be formatted including port, even if it is 5060
  • fulltrace starting now rotates the logfiles
  • added config option s2s_t38_passthrough

16.09 - 23.04.2018

  • changed maximum SIP registration refresh value from 2000 to 3600
  • fixed error configuring PCM slave mode
  • fixed behaviour when T.38 reinvite was rejected and a G711 re-invite was received
  • fixed setting correct port when sip domain is used
  • using uppercase for codecs in SDP now
  • isdn2sip_destination_numformat now used for fxs call as well
  • added config option sip_info_on_facility
  • added config option s2s_nat_opener
  • handling 302 correctly on SIP→SIP calls
  • waiting longer time to go into idle state on FXO calls
  • added experimental_option emergency_numbers
  • fixed stability issues
  • experimental option no100fix can be now 0, 1 or 2
  • now sending 302 transfer in SIP direction if calldeflect is received on ISDN side and cd=1
  • fixed no audio problem when SDP was contained in 182 message
  • refreshing registrations when DNS query result has changed

16.08 - 07.11.2017

  • added toneset for Ireland
  • fixed hostname setting
  • fixed userapp-version issue
  • fixed not printing first line in dialplan debug
  • fixed call progress table backup&restore bug
  • changed default setting of ppi/rpi/xheaders, they are now disabled by default, sip_pai_user=${new_source} now
  • hostname/gateway not displayed in dhcp mode
  • ntpserver setting overrides DHCP provided ntp server if set

16.07 - 25.07.2017

  • fix for parsing sip ppi header
  • added option no100fix, fixing problem when no 100 trying is received
  • fixed sip failover behaviour on gsm
  • fixed memory leak when using stun
  • fixed problem encoding ISDN connected party number

16.06 - 28.06.2017

  • fixed security issues with telnet access to card
  • fixed SIP problems with peers not listening on standard SIP port
  • fixed GUI error message after language switch
  • fixed GUI error saving FXS Clip
  • fixed problem with dialplan restore
  • debug files get tagged with their md5sum now
  • improved DNS SRV handling
  • improved SMS handling

16.05 - 27.01.2017

  • fixed GUI error setting t38 in dialplan
  • fixed GUI error saving GSM extension
  • fixed GUI error setting call progress table
  • fixed GUI Dialplan-Debug behaviour
  • fixed one way audio problem on SIP→SIP calls
  • fixed reinvite handling on SIP→SIP calls

16.04 - 22.12.2016

  • fixed error storing "more settings" in dialplan
  • fixed limitation on density of inbound SIP calls

16.03 - 29.11.2016

  • new responsive GUI
  • new logging facilities
  • new config option skip_setup_ack
  • new config option resync_on_notify
  • new config option isdn_dad_setting
  • new config option dialtone_digits
  • added dialplan variable new_destination_auto
  • fixed VLAN issues
  • fixed problem with dialplan copy and multiple delete
  • fixed SMS problems
  • fixed problem with SIP info messaged on FXS calls
  • try option 67 on DHCP if option 66 is missing
  • display name in register requests now in quotes
  • in-call ISDN Information messages will now converted to DTMF
  • fixed some minor issues in the GUI
  • fixed problem with provisioning polling
  • fixed config option outgoing_bchannels
  • new REST-API functions
  • netconfigserver is now configurable
  • improved qsig name handling
  • support for DNS SRV
  • minimum accepted session expires now configurable
  • Major security fixes, more info here

Known Issues:

  • T38 disable doesn't save in the Dialplan  - as workaround you can configure "t38=0" in the text-area under the "more" tab.


3.0 STABLE - Firmware

3.0.19 - 25.07.2017

  • added option no100fix, fixing problem when no 100 trying is received
  • fixed sip failover behaviour on gsm
  • fixed memory leak when using stun
  • fixed problem encoding ISDN connected party number

3.0.18 - 24.05.2017

  • Security fix, telnet interface not more accessible from LAN by default
  • fixed instablity problems in SIP stack occurring when a large time change shift happens

3.0.17 - 03.02.2017

  • fixed problem in dialplan debug
  • fixed problem with incoming 181 and 182 provisional responses
  • fixed bug in Factory Reset

3.0.16 - 18.01.2017

  • fixed return code for provisioning

3.0.15 - 12.01.2017

  • reworked session handling for dialplan debug for more security

3.0.14 - 10.01.2017

  • reworked GUI session handling. GUI is now more secure as its files can only be accessed via the GUI
  • new_source_auto will now use TON_SUBSCRIBER as default

3.0.13 - 29.11.2016

  • new config option skip_setup_ack
  • new config option dialtone_digits for FXS inbound cals
  • new config option emergency
  • display name in register requests now in quotes
  • in-call ISDN Information messages will now converted to DTMF
  • fixed config option outgoing_bchannels
  • bugfix gsm provisioning
  • fixed problem with SIP info messaged on FXS calls
  • fixed problem with SDP offers containing 16000Hz Codecs


  • No labels

If you need scheduled remote assistance, you can request our on-demand support services: https://www.beronet.com/support