Read this before installing the 23.01 Firmware!

This latest release includes new TLS improvements, improved logging mechanisms, bugfixes and most importantly a more robust firmware updating mechanism to ensure that nothing can go wrong while patching. Refer to the full changelog here: Changelog - beroNet OS (Gateways)

You will need to install a stable firmware with the new installation process in order to continue upgrading to firmware version 23.01.

Please note that the installation process varies depending on the firmware version you are currently using.

Updating to another branch by using the flash install method

Depending on the firmware branch you have currently installed (20.05/20.06/21.02) you can use the new flash method to update to a different branch with less hassle than with the conventional update method.

For this to be possible please update to following firmware (or newer) of the corresponding branch you are on:

For 20.05 branch: https://www.beronet.com/wp-content/uploads/downloads/berofix/release_candidates/20.x/appfs-20.05.05-rc13.tar.gz

For 20.06 branch: https://www.beronet.com/wp-content/uploads/downloads/berofix/release_candidates/20.x/appfs-20.06.01-rc01.tar.gz

For 21.02 branch: https://www.beronet.com/wp-content/uploads/downloads/berofix/release_candidates/21.x/appfs-21.02.03-rc23.tar.gz

These firmware releases provide a new install method which avoids many problems when upgrading to different branches.

Please follow the steps described in this document:

Alternative method to update/flash firmware

Conventional update path

Upgrading from a 20.XX or below version

When updating from a 20.XX or below, install the 20.06 first to have the new update mechanism.

Open

Download the Firmwares via the Web-GUI or directly here:

https://www.beronet.com/wp-content/uploads/downloads/firmwares/appfs-20.06.tar.gz

https://www.beronet.com/wp-content/uploads/downloads/firmwares/appfs-23.01.tar.gz

Upgrading from a 21.XX Firmware

When updating from a 21.XX, install the 21.03 first to have the new update mechanism installed as they include the new update mechanism already.

Open

Download the Firmwares via the Web-GUI or directly here:

https://www.beronet.com/wp-content/uploads/downloads/firmwares/appfs-21.03.tar.gz

https://www.beronet.com/wp-content/uploads/downloads/firmwares/appfs-23.01.tar.gz

• Beta / Release Candidate Firmwares starting at 21.03-rc51 or 21.02.03-rc16 can already install the 23.01 as they include the new update mechanism already.

Additional information

Please note that the firmware update process may take some time, and it is important that you do not turn off or disconnect your device during the update process. Doing so may result in irreversible damage to your device.

Also note that downgrading to an earlier firmware version will not be supported anymore. It is only possible by flashing the entire storage.

This is made difficult on purpose, but our support team is happy to assist the process if needed.

If you have any questions or concerns about the firmware update process, please do not hesitate to contact our technical support team for assistance at https://support.beronet.com.

Thank you for choosing our products and we look forward to continuing to provide you with the best possible experience.

Best regards,

Your beroNet Development Team