Connection Parameters NFON Sip Trunk Flexx

The connection parameters of the NFON SIP Trunk Flexx can be acquired via the nfon portal (SIP Password will be delivered via SMS) and are:

• SIP User name

• SIP Password

Additionally the

• SIP registrar / proxy / domain : siptrunk.cloud-cfg.com

• SIP transport protocols can be: UDP/TCP/TLS (when TLS is selected, SRTP must be used)

SETUP in the NFON web portal

In the NFON web portal please create a SIP trunk under PBX Endpoint by clicking on the plus-symbol in the top right corner. Use the PBX Endpoint Template GENERIC.

Open

The SIP User name is shown on the portal site, the SIP password will be delivered via SMS to the configured cell phone number.

Open

In the secition Number Routing the extensions you want to connect have to be selected.

Configuration of the beroNet Gateway

For the setup of the SIP-accounts on the beroNet Gateway only the Proxy or Registrar field have to be configured to be siptrunk.cloud-cfg.com, the SIP-User and the SIP-Password have to be set and the checkbox for Register has to be enabled.

Configuration of the SIP-Peers:

Configuration of the dialplan

For calls directed to NFON the From-User has to be configured to the corresponding extension. Calls coming via SIP from NFON, can be distinguished by their to-user name. For this you need to add a regular expression for the corresponding Destination Field, if you want to route them to different destinations. The + needs to be masked with a backslash when inside the regular expression.